Frequently added compatible accessories
Save 10% on accessories when purchased with this eBike
Aventon Abound LR Cargo eBike
More Specs
Recommended Rider Height
4'11"-6'3"
Local Pickup Option
We offer free assembly on local pickup orders.
The Abound LR is the answer to all your cargo conundrums! The 750W motor, long rear rack, and 440lb payload capacity make this the ultimate cargo carrier. Whether you're loading up the kids, your beach day essentials, or your most ambitious grocery haul, the Abound LR is ready to take on any challenge. With a gravity cast frame, adjustable quill stem, front suspension, and suspension seatpost, you can ride confidently and comfortably no matter what you're bringing along. With the addition of ACU technology, you'll rest assured knowing you can locate and control your bike from anywhere. The possibilities for what you can carry are endless, so load up and enjoy the ride with Abound LR.
Understand This eBike
Not sure what all the numbers mean? Here are the key things to know when comparing eBikes.
How far will this Aventon Abound LR Cargo really go?
Aventon rates this bike for up to 60 miles of range. Real-world range can vary based on pedal-assist level, rider weight, bike weight, terrain, speed, temperature, tire pressure, cargo, and throttle use.
Riders using mostly throttle or the highest assist setting will often see closer to about half of the advertised maximum range. Lower assist levels and more rider pedaling can significantly extend range.
How powerful is the motor on this Aventon Abound LR Cargo?
This bike uses a 750w Hub-Drive, 80Nm, with up to 1188W of peak output.
The motor's nominal power describes the power it is designed to provide continuously. Peak power is the higher amount it can deliver for short periods, such as accelerating from a stop or climbing a hill.
For eBike classification and legal compliance, nominal motor power is generally accepted as the relevant power figure rather than the short-duration peak power number. Regulations can vary by state and local jurisdiction, so riders should always follow the rules where they ride.
Higher motor power can provide stronger acceleration and better performance on hills or with heavier riders and cargo, but wattage alone doesn't tell the whole story. Torque, bike weight, gearing, wheel size, and the motor controller also affect how powerful an eBike actually feels.
What does the battery size mean on this Aventon Abound LR Cargo?
This bike uses a 36V, 20Ah, 708Wh, Removable LG battery. Battery capacity on eBikes is commonly measured in watt-hours (Wh). The higher the watt-hour number, the more energy the battery can store.
As a general rule, a larger battery can provide more riding range, but battery size alone doesn't determine how far an eBike will go. Bike weight, motor efficiency, assist level, throttle use, rider weight, terrain, speed, tire pressure, temperature, and cargo can all affect battery consumption.
Watt-hours also make it easier to compare battery capacity between different eBikes. For example, a 700Wh battery stores roughly 40% more energy than a 500Wh battery, even if the bikes use different battery voltages.
Keep in mind that a larger battery usually adds some weight and can take longer to charge, so the biggest battery isn't necessarily the best choice for every rider.
What eBike classes can this Aventon Abound LR Cargo be used as?
This Aventon Abound LR Cargo has an assisted top speed of 20 mph and can be configured for Class 1 or Class 2 operation.
Under the commonly used three-class eBike system:
Class 1: Pedal assist only, with motor assistance up to 20 mph.
Class 2: Includes throttle operation up to 20 mph.
Class 3: Pedal assist up to 28 mph. Class 3 operation generally does not include throttle assistance.
Some eBikes can be configured for more than one class, allowing the rider to adjust the bike for different riding locations or regulations. eBike laws and trail-access rules vary by state and local jurisdiction, so riders should check the rules where they plan to ride.
What's the difference between torque and cadence sensors?
eBikes typically use either a torque sensor or a cadence sensor to determine how the motor responds while you pedal.
Torque sensors measure how hard you're pedaling and provide motor assistance in proportion to your effort. This generally creates a smoother, more natural, and more responsive riding experience. The harder you pedal, the more assistance the motor provides.
Cadence sensors primarily detect whether the pedals are turning. Once you begin pedaling, the motor provides assistance based largely on the selected assist level rather than how much force you're putting into the pedals.
Torque sensors are generally considered the more refined system and have become increasingly common on modern eBikes. Cadence sensors can still be useful for riders who prefer the motor to provide more assistance with less pedaling effort.